GAMMA joints for G– and H-profiles are designed to ensure proper alignment of the bodies and to withstand loads.
ST-52-E – Joint for upper groove, G– and H-profile.
ST-52-F – Joint for lower groove, G-profile.
Using the ST-52-E joint, the position of the joint may correspond to the centre clamp tightening point. Therefore, it is recommended that G-profiles also be used with the ST-52-F profile. The joints are complete with self-tapping stainless steel VTEAs
PROPERTIES OF GAMMA ALUMINIUM PROFILE MATERIALS
| Material type | EN AW 6060 |
| Tensile strength Rm (Mpa) | 190 |
| Elastic limit Rp 0.2 (Mpa) | 150 |
| Elongation at 50 mm (%) | 10 |
| HB hardness | 70 |
| Coefficient of linear thermal expansion between 20 oC and 100 oC (1/ oK) | 23×10-6 |
| Preparation for surface oxidation treatment | Excellent |
PROPERTIES OF SUPPORT MATERIALS
| Material type | AISI 304 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,9 |
| Tensile strength N/mm2 | 540 – 750 |
| Elongation at 80mm (%) | 45 |
| HRB hardness | 82 |
| Material type | AISI 430 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,7 |
| Tensile strength N/mm2 | 450 – 600 |
| Elongation at 80mm (%) | 20 |
| HRB hardness | 85 |
Gamma Officine Meccaniche presenta
L’innovativa soluzione per il fissaggio di impianti solari e fotovoltaici!