The GAMMA I-profile is designed for use on a support but is suitable for various applications.
The fastening clamps are inserted and screwed in directly from above without needing to slide anything inside the profile.
The bottom connection to the support is by means of a screw and nut.
The recommended screw is the VTCE 8×16 combined with the DEFZ M8 nut.
(attention the compatible clamps for these profiles are the series ST54 – ST55)
This product can be produced in the various RAL colours on request of the client
TECHNICAL DETAILS
| Code | Material | Size (mm ) | ||
| A | B | L | ||
| TRF-I3 | Aluminium | 20 | 40 | 3250 |
| TRF-I5 | Aluminium | 30 | 41 | 3600 |
PROPERTIES OF GAMMA ALUMINIUM PROFILE MATERIALS
| Material type | EN AW 6060 |
| Tensile strength Rm (Mpa) | 190 |
| Elastic limit Rp 0.2 (Mpa) | 150 |
| Elongation at 50 mm (%) | 10 |
| HB hardness | 70 |
| Coefficient of linear thermal expansion between 20 oC and 100 oC (1/ oK) | 23×10-6 |
| Preparation for surface oxidation treatment | Excellent |
PROPERTIES OF SUPPORT MATERIALS
| Material type | AISI 304 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,9 |
| Tensile strength N/mm2 | 540 – 750 |
| Elongation at 80mm (%) | 45 |
| HRB hardness | 82 |
| Material type | AISI 430 |
| Shape | Cold-rolled |
| Finish | Heat treatment, pickled and skin-passed |
| Density kg/dm3 | 7,7 |
Tensile strength N/mm2
| 450 – 600 |
|
| Elongation at 80mm (%) | 20 |
| HRB hardness | 85 |
© Gamma Officine Meccaniche Srl | Privacy Policy | Cookie Policy | Manage Cookie Consent | Web designer: Alkimedia
Gamma Officine Meccaniche ricerca
Siamo alla ricerca di agenti di commercio motivati per ampliare la nostra presenza sul mercato B2B.
